Hector Noriega

Used power tools and hand tools to install fixtures, floorings, trim and hardware, cutting materials to specified measurements.

Provided exceptional customer service by addressing clients'' concerns promptly and offering solutions tailored to their needs.

Maximized the longevity of woodwork installations by applying appropriate treatments, such as staining or painting, to protect against damage and wear.

Delivered visually appealing interiors with expertly crafted crown molding installations that complemented the existing design elements.

Fixed broken furniture like Chairs , Desk's Table's etc.

A small team of us built a zip line from start to finish over in Eastlake Boy's club.

We built 2 separate platforms one being the launching platform and the other being the landing platform. It was a fun experience because it wasn't your everyday carpentry. It was challenging for the terrain it was built on and how it was up in the air.

We worked as a team, communication was key as well as precise measurements and cuts.

Our main concern was safety at all times ,proper PPE and staying on schedule.

Completed installations of scare rooms throughout .the whole park. Customized different scenarios.

Worked as a team with different people doing different trades. Most work i performed was rough carpentry and lots of assembling from ground up.

I also was allowed to do a mural with spray paint.

I helped out with 4 to 5 projects my buddy was working on. All work was nothing but residential home renovations.

I assisted by picking up materials and dropping it off at different job sites.

I also did some termite damage repair's as well as other type's of carpentry. Assisted with some bathroom tile installation's , drywall repair's , exterior painting and fascia repair's. Used different type's of power tools like skill saw's, tile saw's, nail gun, sawzall, grinder, paint sprayer and numerous hand tools.

.Kept work areas clean, organized, and safe to promote efficiency and team safety.

With Exclusive Development i got a opportunity to demonstrate different skills i hold. I also learned a lot from some of my co workers there as well.

Our projects were over in Fairbanks Ranch, Poway and in Las Vegas, all high end Property's

We did everything from framing, drywall, plumbing, electrical, maintenance, painting both interior and exterior. I also learned how to install slabs of marble a bit of welding , flooring, landscaping and demo.

I had a chance to go out of state and work in Las Vegas doing nothing but finish custom work. I really enjoyed the team we had. I still work with them when ever they call me for certain things or projects and its been a pleasure working with them.

Performed all the high dusting in the whole casino.

We managed that by working one section at a time. We would block off and close down section by section and use scissor lifts to do the high dusting. The job consisted of wearing face masks, head lamps and a shop vac.

We had to be extra careful because casino was operating and there were people all around as we did our job.

Built custom crates for all orders received. We would build crates for packaging items, label them and ship them out.

I had to use precise measurements proper materials and use specific power tools to meet the Navy's job's standard's.

Decreased spending by [Number]% by maintaining detailed records of wood inventories and supplies.

I got my forklift certification because it was used daily to move crates being built for all orders coming in.

Daily clean up of wood shop and keeping track of all assignments being completed.

Delivered projects within tight deadlines, managing time effectively across multiple assignments.

Increased workshop productivity with organization of tools and materials.

Completed complex joinery projects through careful planning, material selection, and efficient execution.

Efficiently managed multiple projects simultaneously, prioritizing tasks based on deadlines and complexity levels.

We did many rip outs and also installed different types of insulation's throughout military ships.

Our tasks changed daily depending on what needed to be done like moving furniture into the ships. Installation of new furniture as well as refrigeration wall and ceiling panel's and grid flooring. Work varied from carpentry, insulating, sanding and painting and moving materials.

I completed my OSHA 10 got certified on a scissor lift and a boom lift. We would use all sorts of hand tools and power tools for every job assigned.

Followed protocols and stayed organized to provide personal and teammate safety.

Demonstrated adaptability by working on a diverse range of projects including rip outs, new construction and moving materials on to the ships. Installations of walls , floors and ceiling panels on to ship's as well.

Achieved accurate cuts using jigsaws,grinders and different power tools while adhering to all safety protocols.

I also learned how to use a scissor lift and boom lift to work on hard to reach areas.

We would have to customize a lot of the sheet metal panels being installed when it was time for installation.

Demonstrated commitment to quality craftsmanship by following blueprints and specifications accurately during each phase of new construction.

While working for Sage's tile & Stone we were doing home renovations. We we're doing all phases from demo, framing, drywall, plumbing, electrical, painting both interior and exterior, stucco, flooring and insulation.

Worked as a team to meet deadlines and assisted by bringing all my skills to the table.

I helped out with a few bathroom remodels as a tile helper and whatever other tasks i was asked to do.

Maintained productive, efficient approach to all tasks.

Cleaned and straightened work areas to maximize productivity and safety.

Supported the development of accurate project estimates by providing input on materials needed, labor requirements, and timeline expectations for various jobs.

Inspect homes for termite damage, wood rot, broken stucco and managed all repairs.

Performed all sorts of carpentry skills from demo work, fascia, decks, porch work, window and door trim as well as finish work.

I also sanded wood all around homes masked and prepped and did all repair work.

Working as a team i also got to Paint houses and also assist as a painter's helper by spraying ,rolling and brushing.

Climbed scaffolding, staging, ladders, and planks to reach work area surfaces and observed safety protocols to prevent falls.

Assembled air ducts, pipes, discharge valves and flues to central heating and cooling equipment.

Located and marked pipe positions, hole passages and duct connections in walls and floors.

Ensured top-quality installations by adhering to local building codes, manufacturer specifications, and industry best practices.

Worked as a team doing new system installations following the blueprints on multiple condos.

Picked up Client in timely matter and safely drove them from point A to point B.

Utilized GPS and other navigation tools to plan routes and stay on schedule.

Achieved safe driving records by consistently following traffic rules and regulations.

Upheld high standards of cleanliness within the vehicle''s interior/exterior appearance for customer satisfaction.

Communicated with passengers to provide useful information and try to be as helpful as possible.

I was working as a private contractor with Ericson and we were doing all major work for Cox cable.

The work we were doing consisted of digging holes to put in new vaults and pegs. We were installing new fiber wire for faster internet communication throughout neighborhoods.

We would have to fish wire from vault to vault using a combination of tools and materials as well as good communication.

Collaborated with cross-functional teams to ensure seamless project execution and delivery.

Demonstrated adaptability by working on a diverse range of projects including commercial renovations and new construction.

Assisted with movement of materials and equipment to job sites.

Worked would change as we completed each project. Projects varied from demo, carpentry, maintenance, painting, millwork and more. We worked using all hand tools and power tools like drills, skill saw's, jig saw's, grinder's sanders and multi tools.

We did a lot of work for most home depots all over the San Diego area. We were doing all there millwork , changing signs, moving storage shelves , setting up there cabinet display's and re arranging pretty much every different store

Covered surfaces with drop cloths, masking tape and paper during painting.

Helped remove damaged wood and repair it. I would also sand all fascia around the house.

Filled cracks, holes and joints with fillers using caulking guns and putty knives.

Examined surfaces for imperfections and applied additional touch ups for a clean completion.

Contributed to positive company reputation by providing exceptional customer service at all times.

Demonstrated excellent teamwork skills, collaborating with fellow movers to complete tasks quickly and accurately.

I would take inventory of all items as well as pictures and pack all items.

Drove box trucks from point A to point B and unpack all of the customer's belonging's

Collaborated with experienced carpenters to improve skillset through hands-on training and mentorship opportunities.

Followed established job site safety regulations and maintained a safe and clean work area.

Utilized hand tools such as hammers, chisels, levels, squares, and measuring tapes to complete tasks with precision.

Assisted with movement of materials and equipment to job sites.

Prepared materials accurately using hand and power tools to make precise cuts.

Built forms dug trenches and used wood to form concrete flooring and walls.

I would clean the Gym by sweeping, mopping, wipe down all equipment as well as weights. I would also clean and sanitize the bathrooms and take out all trash. I would put away all free weights and get gym up to par.

Troubleshot equipment breakdowns and performed preventive maintenance.