Jose Eduardo Curiel Yamada
Industrial Engineer
Monterrey,Nuevo Leon
Overview
6
6
years of professional experience
7
7
years of post-secondary education
Work History
Quality Supervisor
Corning Incorporated
Monterrey, N.L.
11.2023 - Current
- Responsible of ISO/IEC 17025 and ISO 9001 recertification audits, resulting in no findings reported by the auditors
- Served as an Internal Auditor for ISO 9001:2015 and ISO 13485: 2016 Division Quality Audits, responsible for auditing the Bengbu (CN) site, Bedford, Tarboro, and Division (US) sites, as well as the Monterrey (MX) site
- Successfully led the implementation of two Value Stream Mapping (VSM) projects in the quality process. One project focused on the incoming and process areas, while the other focused on final inspection. Achieved USD $3,585.74 in savings from incoming activities, a 22% reduction in cycle time for finished goods inspection, and a 48% reduction in waiting time for finished goods to be inspected
- Conducted root cause analyses on recurring defects, leading to long-lasting solutions and resulting in the following KPI improvements: Right the First Time (Yield) increased from 95.27% in 2023 to 97.45% in 2024, and Complaints per Thousand Cases (CPTC) decreased from 0.509 in 2023 to 0.418 in 2024
- Implemented a Supplier Relationship Management (SRM) program to establish clear performance metrics and conduct regular review meetings with suppliers to address issues promptly, resulting in a significant improvement in supplier responsiveness from 13% in 2023 to 90% in 2024.
- Reduced the amount of material placed in quarantine due to inappropriate non-conforming material procedures from USD 83,000 in 2023 to USD 16,000 in 2024
Quality Engineer
AGP eGlass
Santa Catarina, N.L.
08.2021 - 11.2023
- Successfully implementation of Quality Plans in preparations for plant launching, according to program timelines: Reviewing customers specifications. Identifying special characteristics and critical requirements, develop quality standards including Pre-process, in-process and final inspection, provide training to those affected by the plans
- Apply quality engineering practices and guidance to support project teams and manufacturing operations using Lean tools, Process FMEA, Control Plans, MSA/Gage R&R studies, and statistical analysis. Support multidisciplinary team on completition of the 18 items of PPAP and get the PSW approval by costumer previous to start SOP.
- Participated as the Quality representative in improvement projects focused on eliminating defects such as scratches and scuff marks on glass. Conducted a walkthrough with a cross-functional team to identify key contact points during the process, aimed at implementing corrective actions and reducing incidents
- Applying and documenting lessons learned for all new products implementations and manage resulting inspection data to drive continuous improvement, forms, check-sheets, and related documentation
- Perform internal audits to products and processes according to IATF 16949 Quality Management System, in order to identify areas of opportunities and propose actions to correct nonconformities
Quality Engineer
Vitro Automotive Glass
Garcia, N.L.
02.2021 - 07.2021
- Creating and maintaining quality standards in production lines, conduct product audits, quality inspection checklists, AMEF, Control plan and product releases
- Participating on new products introduction focusing on product quality assurance and quality system compliance
- Attend customer complaints applying Fast response (Quality alerts, Why made / Why shipped, 8Ds), implement containment actions, initiates corrective actions to determine root cause for customer complaints, internal and external audit findings and internal and external product failures/defects
- Assists in the development and implementation of LPA´s and internal quality audits to enhance processes
Product Engineer
Lite-On Automotive
Zapopan, Jal.
01.2020 - 01.2021
- Managed technical product information (BOM, drawings, schematics, specifications, and engineering changes) for new product introduction and mass production
- Led the effective implementation of engineering changes (ECO), manufacturing changes (MCO), deviations, and document changes (DCO)
- Prepared and tracked NPI runs, managed BOM, maintained loading sheets, performed first piece validation, and conducted X-ray analysis
- Coordinated and led new product launch activities, including the implementation of tooling and product changes within operations
- Collaborated with suppliers and managed the quotation process for the maintenance or correction of design/functional issues related to fixtures and stencils used on the production floor
Product Engineering Technician
Sanmina-sci
Guadalajara, Jal.
01.2019 - 01.2020
- Excess and Obsolete Improvement Project: Led the successful upgrade of obsolete PCBAs to shippable revisions, preventing cost impacts due to scrap material. Resulted in a savings of USD $187,262.83 by recovering and reusing previously unsellable finished products
- New Product Introduction (NPI): Conducted pilot checklist, complexity matrix, design problem record, and validation of component presence, polarity, and markings during NPI phase
- Led supplier and component evaluation runs for new products and PCBA engineering changes based on customer requests, ensuring timely and accurate implementation
- IATF 16949, Core Tools, NPI processes (shake-out runs, pilot run, debug run, run-at-rate), IMDS, dimensional reporting, and managed programmable parts, PCNs & PCR, and customer portals
Summary
Industrial Engineer with extensive experience in quality management and product engineering across glass manufacturing and the automotive industry. Proven track record in designing and implementing quality assurance plans for plant SOP, and successfully leading ISO/IEC 17025 and ISO 9001 audits. Skilled in new product introduction (NPI), process optimization, with hands-on expertise in automotive core tools and statistical analysis. Adept at managing customer complaints, implementing corrective actions, and driving continuous improvement to align with quality management standards such as IATF 16949. Passionate about leveraging data-driven insights to optimize operations and deliver exceptional product quality.
Work Availability
monday
tuesday
wednesday
thursday
friday
saturday
sunday
morning
afternoon
evening
swipe to browse
Work Preference
Work Type
Full TimeWork Location
On-SiteImportant To Me
Career advancementWork-life balanceHealthcare benefitsCompany CultureTeam Building / Company RetreatsPersonal development programs401k matchStock Options / Equity / Profit SharingLanguages
English
Advanced (C1)
Education
MBA - Quality And Productivity
TecMilenio University
Monterrey, N.L., Mexico 08.2024 - Current
Bachelor of Science - Industrial Engineering
Tecnologico Nacional De Mexico: Veracruz
Veracruz, Ver., Mexico 08.2011 - 12.2017
Skills
Procedure development
undefinedSoftware
Microsoft Office
Minitab
Timeline
MBA - Quality And Productivity
TecMilenio University
08.2024 - Current
Quality Supervisor
Corning Incorporated
11.2023 - Current
Quality Engineer
AGP eGlass
08.2021 - 11.2023
Quality Engineer
Vitro Automotive Glass
02.2021 - 07.2021
Product Engineer
Lite-On Automotive
01.2020 - 01.2021
Product Engineering Technician
Sanmina-sci
01.2019 - 01.2020
Bachelor of Science - Industrial Engineering
Tecnologico Nacional De Mexico: Veracruz
08.2011 - 12.2017
Similar Profiles
Jordan SchronceJordan Schronce
Splicing Technical Operator at Corning IncorporatedSplicing Technical Operator at Corning Incorporated
Robert SalituriRobert Salituri
Fiber Processing Technician Operator at Corning IncorporatedFiber Processing Technician Operator at Corning Incorporated
Steven BakerSteven Baker
Mixing operator at Corning IncorporatedMixing operator at Corning Incorporated