Mechanical Design Engineer with 11+ years of international experience. Specializing in product design and development, with expertise in interior/exterior automotive trim parts and computer cases. Experience conducting feasibility and DFMA analyses to optimize injection-molded and sheet metal components from concept through prototyping and manufacturing.
Work History
Experienced Product Developer
2 Years 6 Months
Fractal Gaming | 02.2024 - 08.2026
Technical Project Leadership & DFM/DFA Optimization: Lead Engineer for a Vision case and Support Engineer and Cad development for the Define One project, driving mechanical designs from concept to successful manufacturing release. Managed end-to-end deliverables on schedule and within scope while conducting technical feasibility studies to optimize products for high-volume manufacturing, balancing cost, aesthetic design requirements, and brand standards through rigorous DFM principles.
Directed internal alignment and managed external communication with manufacturing and sourcing partners, including BOM control and cost discussions.
Exteriors Mechanical Engineer
8 Months
Zoox | 06.2022 - 02.2023
Autonomous Vehicle Component Design: Led the mechanical design, CAD development, and validation testing of fisheye camera brackets, enclosures, and bracket plates for a low-production-volume Autonomous Vehicle (AV) exterior L3 model. Successfully released the product for production within an aggressive two-month timeline and managed engineering changes during validation.
Styling & Molding Optimization: Redesigned exterior camera enclosures and proposed optimized surface alternatives to Styling department to resolve complex sealing and injection molding issues, securing immediate approval without further modifications.
Designed and developed interior compute cover with 15 sheet metal bending brackets and 3 press-molding panels to mitigate electronic heat transfer into passenger cabin, validating thermal effectiveness and structural resistance through CAE simulation.
Design Engineer
2 Years 7 Months
Kasai North America | 11.2018 - 06.2021
High-Volume Automotive CAD Modeling: Constructed complex 3D CAD models for the Upper and Center Trim of the Rear Door LNG, accommodating multiple design variants within a tight schedule of four months for the Honda Pilot 2023 program. Successfully launched the program, including the CAE of impact test simulations and prototype confirmation.
Minor model change & Assembly Integration: Designed the Inner Panel Handle and redesigned the Lower Front/Rear door trim for the Acura RDX 2022 minor model change, incorporating new internal lighting features. Managed the release of two new mold sets, ensuring safety and meeting testing validation requirements; also contributed to assembly line adjustments.
Developed design studies, feasibility analyses, and parts distribution study for better efficiency in terms of material and mold distribution for the RR Side Lining Honda Odyssey 2023, presenting technical solutions to clients on time and gaining acceptance for required styling modifications.
Mechanical Design Engineer
1 Year 9 Months
Valeo Mexico Technical Center | 01.2017 - 10.2018
CAD development: Developed 3D CAD models and 2D drawings for lighting systems components on the Ford Mustang Mach-E 2020, which included the DRL/TI, Carrier, Bracket for HB, Inner Lens, Outer Lens, and HB-LB extender arm connector. Developed a specialized two-color shot design for the inner lens.
Analyzed outer lens styling, proposed surface counter-proposals to client, and performed mechanical simulations on over-thickness, steel blades, sink marks, transition areas, and Young’s modulus for attachment zones, enhancing design integrity.
Completed advanced specialized training at Valeo Seymour (USA) and CTC Valeo Wuhan (China), mastering Catia V5 and Valeo Methodology, including HL and RL basic design, plastic design, design rules, gap & flush, coating material & process, and DFMEA.
Design Senior
3 Years 3 Months
Kasai Mexicana | 10.2013 - 01.2017
Cost Reduction: Directed 5-member engineering team in cost-reduction initiatives, achieving corporate savings targets and earning an internal recognition award.
Served as primary engineering interface for Nissan and Mazda programs, negotiating engineering design changes, RFQs, technical specifications, prototype components, testing protocols, and QA resolutions with OEM clients.
Safety Regulation Compliance: Designed and developed Front (FR) Pillar and Center (CTR) Upper Pillar trims for Nissan Note and Versa 2017 programs, ensuring alignment of new styling requirements with US safety standards (FMVSS226), following the project from RFQ to Start of Production (SOP) timing.
Education
Bachelor’s degree - Industrial Design
Universidad De La Salle Bajio | León, Guanajuato, Mexico | 07-2013
Diploma - Industrial Design and Digital Modeling for Business
Universidad De La Salle Bajio | León, Guanajuato, Mexico | 09-2015
Course - Automotive Design Coursework
Universidad De La Salle Bajio | León, Guanajuato, Mexico | 02-2013
Skills
3DX & CATIA V5 (Part Design
Generative Shape Design
Assembly
Drafting) - Advanced
SolidWorks - Advanced
Microsoft Office (Excel
Word
PowerPoint and Outlook) - Advanced
Adobe Photoshop - Intermediate
AutoCAD - Intermediate
PDM Honda - Intermediate
Nissan Tool Kit - Intermediate
Rhinoceros - Intermediate
3D Max - Intermediate
Adobe Illustrator - Basic
Final Cut - Basic
NX 9 - Basic
Languages
Spanish: Native language
English: Advanced
Timeline
Experienced Product Developer
Fractal Gaming
02.2024 - 08.2026Read More
Exteriors Mechanical Engineer
Zoox
06.2022 - 02.2023Read More
Design Engineer
Kasai North America
11.2018 - 06.2021Read More
Mechanical Design Engineer
Valeo Mexico Technical Center
01.2017 - 10.2018Read More
Design Senior
Kasai Mexicana
10.2013 - 01.2017Read More
Universidad De La Salle Bajio
Bachelor’s degree from Industrial Design
Read More
Universidad De La Salle Bajio
Diploma from Industrial Design and Digital Modeling for Business